High Temperature Industrial Humidity Probe | HC2A-ICXXX

Description High Temperature Industrial Humidity Probe | HC2A-ICXXX Probe type Industrial probe Humidity sensor Hygromer HT-1 Temperature sensor PT100 1/3 DIN Class B Long-term stability <1 %rh / year Measuring range -100…200 °C (short-term peak load) / 0…100 %rh Accuracy w. adjustment profile “standard” at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K Accuracy at 23 ±5 °C ±0.8 %rh / ±0.1 K Response time t 63 <15 sec. Dimensions Ø15 x 100 mm / Ø15 x 250 mm / Ø15 x 400 mm / Ø15 x 550 mm / Ø15 x 700 mm Operating range -100…200 °C / 0…100 %rh Allowed wind speed 3.5 m/s, without filter Psychrometric calculations Dew or frost point Analogue outputs scaleable by the user Yes Software Update With internet and HW4 software User information from Software HW4 (devicemanager) Type of output signals 2 x 0…1 VDC Digital output signal (standard) UART Service Interface UART FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible Probe adjustment by software 1 Point & multipoint %rh & °C Analog output signal (standard) 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C Reverse voltage protection Mechanically in the connector Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable. Probe material PPS Probe protection Filter carrier, brass nickel plated Filter cartridge depending on the application, order separately Power supply 3.3…5 VDC Calibration certificates are issued during the production process. New calibration certificates are available upon request at an additional cost. High Temperature Industrial Humidity Probe | HC2A-ICXXX